Dew Point and Moisture
Humidity And Temperature Calibration Systems
Humidity Standards and Calibration Devices - Rotronic
- Traceable to national standard
- Inexpensive calibration on site
- Simple and safe use
Industrial Grade Chilled Mirror Hygrometer - Michell Optidew
- Measurement from -40 (-40°F) frost point up to +120°C (248°F) dew point
- Accurate to ±0.15°C dew point, ±0.1°C temperature
- Available in bench top and wall mount configuration
Chilled Mirror Hygrometer - Michell S8000 Remote
- Measurement from -40 (-40°F) frost point up to +120°C (248°F) dew point
- Accurate to ±0.1°C dew point and ±0.1°C temperature
- Fundamental, low drift measurement
Humidity Generator - Rotronic HygroCal100 Advanced
- Truly portable at 3.2kg, and completely self-contained
- Intuitive UI makes automating probe verification simple
- Integral battery pack means validation can be done without access to services
Precision Chilled Mirror Hygrometer - Michell S8000
- Measurement from -60 (-76°F) frost point up to +40°C (104°F) dew point
- ±0.1 °Cdp (±0.18 °Fdp) accuracy
- Measurement at pressures up to 20barg
RH and Temperature Probe Calibrator -Rotronic HygroGen 2
- Generates stable humidity 2…99 % RH and temperature -5…60 ° conditions (<±0.1 %RH, <±0.01 °C)
- Humidity and temperature changes in less than 5 min
- Time-saving multiply probes calibration
High-Precision Chilled Mirror Hygrometer Michell S8000 RS
- Measurement from -90°C (-130°F) frost point up to +20°C (68°F) dew point
- Accuracy of ±0.1 °C
- High sensitivity and fast response due to advanced dual optics system
Humidity and Temperature Probe Calibrator - Michell OptiCal
- Simple operation and maintenance
- Easy calibration of relative humidity sensors
- Excellent chamber stability and uniformity
Cost Effective Humidity Validator - Rotronic S904
- Simple operation and maintenance
- Easy calibration of relative humidity sensors
- Excellent chamber stability and uniformity
High Precision Chilled Mirror Hygrometer – Michell S8000 -100
- Precision measurement from -100°C (-148°F) frost point (13.8ppbV) up to +20°C (68°F) dew point with no need for additional cooling
- Accuracy of ±0.1 °C (±0.18 °F)
- High sensitivity and fast response due to advanced dual optics system
Advanced Dew-Point Generator – Michell ADG400
- Full-color touch-screen HMI
- 11-point factory programmed dew-point setpoint table from -80 °C to +20 °C at 10 °C intervals
- 13-point user programmable dew-point setpoint table
Dew-Point Calibration System - Michell DCS
- Complete dew-point calibration solution with optional compressor, dryer, dew-point generator, reference instrument and optional manifold
- Generated output responds quickly to a change of set point
- Stable humidity generation
DG2, DG3, ADG400 and VDS3 - Michell Dew-Point Generators
- Manual selection, touchscreen or computer control of generated dew point
- -100...+20 °C dew-point range capability, depending on model
- Precision flowmeter or mass flow controller operation
Dryers for Humidity Calibration Systems - PSD2 and PSD4
- Excellent long-term stability
- Maintenance free except for a desiccant change once every 5 years
- Completely self-contained